MOP/MOK/MPQ/MSP/MST/MSC/MDL/MHF/MBA/MBS/MAF/MAD HOME > SEWAGE PUMP > 50Hz




|



MOP
MOP100 submersible pump

Adopt imported single-face mechanical seal, imported overheat protection device is equipped inside the motor, which provides automatic protection. At the same time, fully water cooling configuration, operating under low current, which can make the pump run for a long time. It is not only suitable for common clean water supply and drainage such as in the field of gardening, water pool circulation, but also for drainage of accumulated water in a small area.

Model
(50HZ)
Power Voltage P/RPM Max Flow Max Head Outlet  Max Particle
w HP V P/rmp m³/h m mm mm
MOP100 100 1/8 220 2P/2850 7 9 11/18.5 3.4
MOP250 250 1/3 220 2P/2850 9.5 11 11/18.5 3.4



MOK

For fish pond circulation Power saving,Big flow

These big flow submersible axial flow pumps are our company's new international patented design,which adopts extra-fine materials such as ltalian high quality wearproof carbon0ceramic dual mechanical seal,316L anti-corrosive stainless steel motor shaft,built-in imported over heat protector,AISI304 motor shell and pump shell,high strength composite plastics etc.With the advantages of big flow and small power,24 hours duty,power saving and durable,low nose,easy installation.These pumps are especially suitable for water circulation and filtration for marine aquiculture and ornamental fish pond.


Model H(mm) W(mm) DN(mm)
MOK90-60 695 146.6 90
MOK110-100 695 146.6 110
MOK110-150 680 146.6 110
MOK110-250 680 146.6 110

Model
(50HZ)
Power Voltage Max Flow Max Head Outlet
HP w V m³/h m mm
MOK90-60 1/12 60 220/240 23 1.2 90
MOK110-100 1/8 100 220/240 30 1.6 110
MOK110-150 1/5 150 220/240 1.7 1.7 110



MPQ
Ornamental Fish Pond Bubble Aerator Pump (Water Jet)

Ornamental Fish Pond Bubble Aerator Pump (Water Jet) uses a submersible motor placed 0.5 to 0.7 meters deep. It generates high-speed water flow through high-speed rotation of a special impeller, and forms negative pressure in the mixing chamber. After air is automatically sucked into the mixing chamber, water and air mix at high speed, generating rapid water flow and the water is jet out to a long distance, thereby circulating water in a larger area of the fish pond. The high-speed water flow aerates the surrounding water in the fish pond with ample oxygen, and increases oxygen levels even at depths. The aerator also circulates water in the bottom of the pond, pushing it up, thereby allowing sulfides, nitrites, ammonia and other harmful substances to decompose through the action of sunlight, when the water reaches the top. At the same time oxygen-rich water replaces the water in the bottom, ensuring the pond water has sufficient oxygen content, thereby being suitable for breeding koi and other fish, making the fish more active and strong, and improve their overall health. This improves pond breeding level and increases economic benefits, especially for high-end ornamental fish breeding, such as koi and other high-end ornamental fish. The Aerator Pump is a high-tech product and the first choice for all koi lovers and koi breeding specialists.

[ Product Features ]

(1) Adopts new deep submersible pump motor technology, special mixed flow jet mechanism, strong water jet capacity, can jet out water up to 8 meters, increases water flow, and has long service life.

(2) Promote koi to be more active and strong, makes fish healthier with better body and skin texture, and enhances the fishes’ elegance as they swim.

(3) Improve pond breeding level and increases economic benefits.

(4) Energy-saving, low noise, large water column and oxygen mixing capacity, highly suitable for fish growth.

Model MPQ150 MPQ250 MPQ500
power 150W 250W 500W
voltage 220V 220V 220V
frequency 50HZ 50HZ 50HZ
flow 55m³/h 80m³/h 180m³/h
Air intake 8 m³/h 13 m³/h 28m³/h
Best depth 0.3-0.7m 0.3-1m 0.3-1m




MSP

Sewage Submersible Pump 50Hz 220V

Characters:
With ltalian dual mechanical seal,imported thermal protection device and 316L SS shaft.Pump shell can be AISI304 or plastic.For fish pond and household use.

Model Power Voltage Max Flow Max Head Outlet
(50HZ) W HP V m³/h m mm
MSP100 100 1/8 220 6.5 6.3 11/18.5
MDP100 100 1/8 220 6.5 6.3 11/18.5
SMSP 100 1/8 220 6.5 6.3 30
SMDP 100 1/8 220 6.5 6.3 30



MST
MST MDT 100,150,250,400 Sewage Submersible Pump
Characters:
Italian dual mechanical seal.With imported thermal protection device,316L SS shaft.AISI304 PUMP BODY.Non-metal parts are made of PPS material.Small power,big capacity,energy saving.Suitable for water circulation in the fish pond of restaurant,villa and factory,also can be used for mariculture.

Model H1(mm) H2(mm) A(mm) DN(mm)
MST150 349 177 225 40/50
MST250 361 177 225 40/50
MST400 400 183 250 40/50


Model
(50HZ)
Power Voltage P/rpm  Max Flow Max Head Outlet Max Particle
w HP V r/min m³/h m mm mm
MST100 100 1/8 220/240 2P/2850 17 5 40/50 35
MST150 150 1/5 220/240 2P/2850 15 5.5 40/50 35
MST250 250 1/3 220/240 2P/2850 18 6.5 40/50 35
MST400 400 1/2 220/240 2P/2850 22 9.2 40/50 25
MSC550 550 0.75 220/240/380 2P/2850 32 10 40/50 25
MSC750 750 1 220/240/380 2P/2850 39 12 40/50 25

Items marked with * are equipped with cast iron base.




MSC

MSC Sewage Submersible Pump

Italian dual mechanical seal.With thermal protection device and 316 SS shaft.Stainless steel 304 pump body.Non-metal parts are made of PPS material.Small power,big capacity,energy saving.Suitable for the circulating of seawater in the fish reserve of restaurant,villa and factory,also can be used for mariculture.



Model Power Voltage P/rpm Max Flow Max Head Outlet Max Particle
(50HZ) W HP V r/min m³/h m mm mm
MSC550* 550 0.75 220/240 2P/2850 32 10 40/50 25
MSC750* 750 1 220/240 2P/2850 39 12 40/50 25



MDL
MDL,MDB 550 All Stainless Steel Pump

Characters:

With ltalian dual mechanical seal and thermal protection device and 316 SS shaft.Stainless steel 304 pump shell.For mariculture,industrial,and domestic sewage use.


Model Hight
(mm)
Width
(mm)
Outlet
(mm)
MDL550 412 193 40

Model Power Voltage Max Flow Max Head Outlet
(50HZ) W HP V m³/h m mm
MDB550 550 3/4 220 10 10 40
MDL550 550 3/4 220 10 11 40

 






MHF

Property:

1. Motor shell, top cover, screw and pump shaft are made of 304 stainless steel.

2. The cable head is molded by one body, which has good waterproof property and large power consumption.

3. the base adopts PVC plastic material, which has good anti-aging and crash worthiness.

4. beautiful appearance, light weight, small volume and easy to use.

Usage:

Water is eliminated, all kinds of water in basement, factory and site, waste water removal, horticultural Stone Mountain circular waterscape and so on.

Type Power Voltage Poles Flow Head Outlet
kW HP V Rpm m³/h m mm
MHF203 0.37 0.5 220 2850 7 7 50
MHF307 0.75 1 220 2850 20 5 75




MBA
Property:
  • AISI304 motor shell,upper cover,strainer,shaft,and nuts.
  • Italian double face mechanical seal,AC over-heat protector inside.
  • Integrated plug,good water proof,energy saving,big flow.
  • Good appearance,small and light,easy to use and maintain.

Usage:
Draining standing-water and waste water for cellar,plant,construction site etc.
Water circulation for gardening and rockery.



Model H1(mm) H2(mm) A(mm) DN(mm)
MBA202 363 167 236 40/50
MBA203 363 167 236 40/50
MBA205 363 167 236 40/50
MBA207 422 203 251 40/50
MBA211 437 203 251 40/50
MBA315 457 231 251 75
MBA322 487 231 251 75


Model H1(mm) H2(mm) A(mm) DN(mm)
MBA322 501 243 387 75
MBA337 576 255 456 75
MBA355 601 255 456 75
MBA475 677 316 576 100
 


Mode
(50HZ)
Power Voltage Rotation   Max Flow Max Head Outlet Max Particle Weight
Kw HP V P/rmp m³/h m mm mm kg
MBA202 0.25 0.33 220 2P/2850 12 9.3 40/50 7 -
MBA203 0.37 0.5 220 2P/2850 20 10 40/50 6.8 13.9
MBA205 0.55 0.75 220/380 2P/2850 22 11 40/50 6.8 14.7
MBA207 0.75 1 220/380 2P/2850 48 10.5 40/50 5.5/7 21
MBA211 1.1 1.5 220/380 2P/2850 56 13.6 40/50 5.5/7 22.3
MBA315 1.5 2 220/380 2P/2850 64 15 75 8 24
MBA322 2.2 3 220/380 2P/2850 70 15 75 8 40.2
MBA337 3.7 5 380 2P/2850 70 27 75 10 77.7
MBA355 5.5 7.5 380 2P/2850 75 33 75 10 81.2
MBA475 7.5 10 380 2P/2850 96 36 100 12 93.7




MBF

Purpose:
  1. Used in construction site,engineering foundation construction,public facilities and waterworks.
  2. Drainage sewage from cellar of all sorts of high buildings,bomb shelters,subways,etc.
  3. Treat sewage and transport circulating water in small and medium size enterprises.
  4. Pumping liquid with slag for enterprises in the filed of food,paper making,brewing,steel and non-ferrous metal, tanning, textile, pharmacy, cement.
  5. Pumping slurry in all kinds of breeding industry like chicken farm,pig farm,fish ponnd,septic-tank,etc.

Model H1(mm) H2(mm) A(mm) DN(mm)
MBF455 603 269 495 100
Property:
MBF series of sewage submersible pump is the professional submersible equipment specially developed by our company in order to resolve waster water drainage containing large particles.It adopts imported ltalian double face mechanical seal,.Cable thrum adopt antifog design make the product excellent waterproof performance,motor shell,pump shaft and screw adopts 304 stainless steel material,make the product has the characteristics of beautiful and durable.


Model(50HZ) Power Voltage P/rmp Max Flow Max Head Outlet Max Particle
Kw HP V r/min m³/h m mm mm
MBF311 1.1 1.5 380 2P/2850 46 13 75 50
MBF315 1.5 2 380 2P/2850 50 14 75 50
MBF322 2.2 3 380 2P/2850 60 17 75 50
MBF437 3.7 5 380 2P/2850 85 18 100 55
MBF455 5.5 7.5 380 2P/2850 98 23 100 55




MBS

     
Property:
  • AISI304 motor shell,impeller,diffuser,strainer,and nuts.Shaft in 316L special material.
  • Italian double face mechanical seal,AC over-heat protector inside.
  • Integrated plug,good water proof.
  • Good appearance,small an ligh,easy to use and maintain.

Usage:
Especially for work places which have a high requirement for water quality,eg.fountain, aquarium fish cultivation and industrial waste water,especially for draining industrial acid or alkaline waste water.

Model H1(mm) H2(mm) A(mm) DN(mm)
MBS322 503 258 408 75

 
Model H1(mm) H2(mm) A(mm) DN(mm)
MBS207 426 203 254 50
MBS211 441 203 254 50
MBS315 461 231 254 75

Model
(50HZ)
Power Voltage Rotation   Max Flow Max Head Outlet Max Particle Weight
Kw HP V P/rmp m³/h m mm mm kg
MBS203 0.37 0.5 220 2P/2850 20 10 40/50 7 12.1
MBS205 0.55 0.75 220/380 2P/2850 22 11 40/50 7 13.2
MBS207 0.75 1 220/380 2P/2850 48 10.5 40/50 7 18
MBS211 1.1 1.5 220/380 2P/2850 56 13.6 40/50 7 19.3
MBS315 1.5 2 220/380 2P/2850 64 15 75 8 23.1
MBS322 2.2 3 220/380 2P/2850 70 15 75 8 30.9
MBS337 3.7 5 380 2P/2850 70 27 75 13 -
MBS355 5.5 7.5 380 2P/2850 75 33 75 13 -
MBS475 7.5 10 380 2P/2850 96 36 100 15 -



MAF

Property:
  • Non-clog impeller and diffuser,good performance for muddy waste water.
  • Italian double face mechanical seal,AC over-heat protector inside. Special anti-mist design for the plug,good water proof.
  • AISI304 motor shell,shaft and nuts.
  • Good appearance,small and light, easy to use and maintain.

Usage:
For building basement,farming field, food factory and industrial waste water drainage.For dirty and waste water drainage in sewage plants.
P: Three-channel unshrouded non clog impeller,high discharge capacity,suitable for muddy sewage with big solid.   A: Open impeller,with extra hard tungsten steel blade to cut foregin material,prevent the pump getting clogged.
E: Unshrouded imppeller,non clog,double channel design for good balance and smooth running.For high head with big flow.   B: Suitable for sewage with solid and fibrous matter,to prevent the pump getting entwined.Good performance in flow and head.

Model H1(mm) H2(mm) A(mm) DN(mm)
MAF207 440 221 264 40/50
MAF211 455 221 264 40/50
MAF315 533 275 403.1 75
MAF322 533 275 403.1 75
MAF437 678 342 580 100
MAF455 693 342 580 100
MAF475 708 342 580 100

Model
(50HZ)
Power Voltage Rotation   Max Flow Max Head Outlet Max Particle Weight
Kw HP V P/rmp m³/h m mm mm kg
MAF202 0.25 0.33 220 2P/2850 12 9.3 40/50 9 -
MAF203 0.5 0.37 220 2P/2850 18 11 40/50 7 14.6
MAF205 0.75 0.55 220/380 2P/2850 22 12 40/50 7 15.4
MAF207 1.5 0.75 220/380 2P/2850 50 11.6 40/50 7 17.5
MAF211 1.5 1.1 220/380 2P/2850 56 14.5 40/50 7 22.9
MAF315 2 1.5 220/380 2P/2850 64 15 75 20 25.9
MAF322 3 2.2 220/380 2P/2850 80 15 75 20 42.5
MAF437 5 3.7 380 2P/2850 128 23 100 20 91.3
MAF455 7.5 5.5 380 2P/2850 144 27 100 22 94.3
MAF475 10 7.5 380 2P/2850 156 31 100 22 98.1




MAD

  Impeller type A is half open style with super-harden tungsten steel blade which can cut off foreign matter and prevent solid sewage from blocking.
  Impeller type E is half open style of symmetrical double runners design with good balance, which leads to smooth running without blockage. It is suitable for the need of high head and large flow.
  Impeller type B can drain sewage containing solids and fiber material in a max. effect. This impeller can avoid foreign matter from winding up.
 
 
Model H1(mm) H2(mm) A(mm) DN(mm)
MAD4-422 684 323 592 100
MAD4-437 684 323 592 100
MAD4-455 800 413 686 100
MAD4-475 850 413 686 100
MAD4-6110 1006 489 888 150

MAD series of submersible heavy sewage pump is the professional submersible equipment specially developed by our company in order to resolve waster water drainage containing large particles and fiber material in it. In allusion to different service condition under different power, three types of impellers E/A/B are designed to help drainage waster water containing large particles and fiber material to a max. degree. At the same time, the pump adopts Italian imported double-face mechanical seal with the characters of wear-resisting, heat-resisting and a better lubrication, which create a more durable service life for the pump by fully waterproof.

Model
(50HZ)
Power Voltage  P/RPM Max Flow Max Head Rated Flow Rated Head Outlet Max Particle
KW HP V r/min m³/h m m³/h m mm mm
MAD4-422 2.2 3 380 4P/1450 110 16.5 55 10 100 50
MAD4-437 3.7 5 380 4P/1450 140 17 60 12.4 100 50
MAD4-455 5.5 7.5 380 4P/1450 160 22 70 14.7 100 40
MAD4-475 7.5 10 380 4P/1450 180 25.5 80 18 100 40
MAD4-6110 11 15 380 4P/1450 340 21.2 160 13.5 150 70

Purpose:

  1. Used in construction site, engineering foundation construction, public facilities and waterworks.
  2. Drainage sewage from cellar of all sorts of high buildings, bomb shelters, subways, etc.
  3. Treat sewage and transport circulating water in small and medium size enterprises.
  4. Pumping liquid with slag for enterprises in the field of food, paper making, brewing, steel and non-ferrous metal, tanning, textile, pharmacy, cement.
  5. Pumping slurry in all kinds of breeding industry like chicken farm, pig farm, fish pond, septic-tank, etc.
Tel: 86-0750-3656332   3656339     Fax: 86-750-3656303   3656300     E-mail:ruirong@ruirong.com   eg@ruirong.com
Copyright © Guangdong Ruirong Pump Industry Co.,Ltd.   All right reserved.